If you have a Whirlpool oven and the light is out, there is a way to replace it. This post will cover how you can replace the oven light bulb and provide a few tips to help prevent it from going out. 

Whirlpool oven light bulb not working?

If you’ve ever experienced a Whirlpool oven light bulb not working, you’ll know it’s never a good sign. If your oven light is out and the oven is still functioning, this may be because the oven was built with a faulty bulb. However, if your furnace is blowing cool air despite being turned off and your lights are flickering on and off, there may be something wrong with your home’s breaker box or appliance.

You’ll need to look closely at your breaker box and ensure that nothing within the box is overheating. If it appears to be overheating, you can try to reduce the load by turning off some of your electrical appliances.

After you’ve again checked that your breaker box is in good working order, you may investigate whether or not a specific appliance or piece of household machinery is to blame. Please pay particular attention to all of your breakers and make sure that none of them are tripped. 

After ensuring all breakers are in the on position, carefully take note of each appliance and piece of electronic equipment plugged into an outlet and turn them off one by one. If a device such as a dishwasher has multiple cycles and might need a small amount of time to complete the cycle, make sure that each cycle is completed before moving on to the next. 

How do you replace the oven lightbulb on a Whirlpool oven?

Below is how to replace the Whirlpool light bulb. But before then, you can get a replacement oven light bulb from Amazon for fast shipping.

1. Unplug your appliance

Unplug your appliance and wait for at least 15 minutes. This will allow any power in your electricity circuit to discharge before touching anything inside the appliance, thus avoiding electrical shocks.

2. Turn the appliance on its side. 

You want to access the bulb cover to remove it and gain access to the lightbulb.

3. Remove the screws from the light cover to remove them from the oven. 

Your exact replacement will vary based on your precise Whirlpool oven model, but most models have a Phillips screwdriver-shaped screw. If your model requires a different type of screwdriver, you’ll need to use that instead.

Once you have removed the screws, set them aside, so they don’t get misplaced or lost during this process. Next, carefully remove the light cover. Finally, you can access the light bulb and replace it if necessary.

If your model doesn’t come with a bulb replacement kit near the light cover, you’ll need to purchase one separately. Your manufacturer most likely offers a bulb replacement kit if they offer this brand of Whirlpool oven. That way, it will be easier for you to replace the bulb instead of purchasing an entirely new appliance. Buying the bulb replacement kit might be more cost-effective, even if you need to replace the entire appliance.

4. Use a screwdriver to remove it from its socket.

Now that you’ve removed the light cover or access panel, you should see a light bulb or an access panel. If not, then this is why your Whirlpool oven light is out! Use a screwdriver to remove it from its socket, then replace it with your new one. You can also use your screwdriver to unscrew the access panel on many models of Whirlpool ovens to gain access to the bulb without having to unplug or turn off your appliance first.

5. Insert the new bulb.

Once you’ve removed the bulb from its socket and replaced it with your new one, carefully place the access panel on its socket. Screw back the screws you removed earlier, then set them aside to avoid losing them.

If a bulb removal tool that comes with the new bulb is used, gently push the light bulb back into its socket and ensure it fits before replacing it or moving on to the next step.

After removing your old light bulb and replacing it with a new one, carefully replace the access panel on its socket until they’re flush. Replace the screws you removed earlier, then set them aside to avoid losing them.

Ensure the screws are tight and the light bulb is securely in place if you didn’t get a bulb replacement kit along with the new bulb.

6. Turn the appliance on.

Turn the appliance on to see if it successfully turns on or stays on. If it doesn’t, turn it off and check if there’s an error in its display panel. If there is an error code, try diagnosing it with the owner’s manual or your model-specific instructions. If not, call a technician to come out and diagnose this problem or have them do so remotely by accessing your Whirlpool oven through their website or mobile apps.

Conclusion

Having replaced the bulb, restart the device and look for any error messages. Your next chance to do so, before it ventures out on its own again, is right now. If you’ve turned off everything in your home and replaced the bulb, but your oven still isn’t working, it’s time to call Whirlpool and talk with a maintenance specialist.

You can safely reassemble the parts if there is no error code. However, before plugging your appliance back in and turning it on, double-check that all screws are securely in place.